SR30W1UUM(GK) THK Radial Linear Guide (Block Only) Interchangeable SR Series

With over PRECISION BEARING CORP. 10170 full-service stores, our SR30W1UUM(GK) THK Radial Linear Guide (Block Only) Interchangeable SR Series inventory is extensive and our parts are priced right. within 24 hours. This 130x75x25 helps you maximize your productivity by saving time and your 130x75x25 Size (mm) hard-earned dollars.

Brand Name:THK
Model Number:SR30W1UUM(GK)
Bearing number:7215 ACD/HCP4A
Size (mm):130x75x25
Bore Diameter (mm):130
Outer Diameter (mm):75
Width (mm):25
d:75 mm
D:130 mm
B:25 mm
PDF SR30W1UUM(GK)

Product Details

Bearing number7215 ACD/HCP4A
Size (mm)130x75x25
Bore Diameter (mm)130
Outer Diameter (mm)75
Width (mm)25
d75 mm
D130 mm
B25 mm
d192.9 mm
d292.9 mm
D1112.1 mm
r1,2 - min.1.5 mm
r3,4 - min.0.6 mm
a36.5 mm
da - min.84 mm
db - min.84 mm
Da - max.121 mm
Db - max.125.8 mm
ra - max.1.5 mm
rb - max.0.6 mm
dn96.6 mm
Basic dynamic load rating - C68.9 kN
Basic static load rating - C058.5 kN
Fatigue load limit - Pu2.5 kN
Limiting speed for grease lubrication11000 r/min
Limiting speed for oil lubrication18000 mm/min
Ball - Dw15.875 mm
Ball - z17
Gref14.895 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA430 N
Preload class B - GB860 N
Preload class C - GC1720 N
Preload class D - GD3440 N
Calculation factor - f1.08
Calculation factor - f10.99
Calculation factor - f2A1
Calculation factor - f2B1.01
Calculation factor - f2C1.03
Calculation factor - f2D1.06
Calculation factor - fHC1.01
Preload class A234 N/micron
Preload class B304 N/micron
Preload class C401 N/micron
Preload class D540 N/micron
r1,2 min.1.5 mm
r3,4 min.0.6 mm
da min.84 mm
db min.84 mm
Da max.121 mm
Db max.125.8 mm
ra max.1.5 mm
rb max.0.6 mm
Basic dynamic load rating C68.9 kN
Basic static load rating C058.5 kN
Fatigue load limit Pu2.5 kN
Attainable speed for grease lubrication11000 r/min
Attainable speed for oil-air lubrication18000 r/min
Ball diameter Dw15.875 mm
Number of balls z17
Reference grease quantity Gref14.895 cm³
Preload class A GA430 N
Static axial stiffness, preload class A234 N/µm
Preload class B GB860 N
Static axial stiffness, preload class B304 N/µm
Preload class C GC1720 N
Static axial stiffness, preload class C401 N/µm
Preload class D GD3440 N
Static axial stiffness, preload class D540 N/µm
Calculation factor f1.08
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.01
Calculation factor f2C1.03
Calculation factor f2D1.06
Calculation factor fHC1.01
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing1.04 kg
View more

Company Profile

Phone 526-627-8021
View more

Related News

  • are bones swiss ceramics worth it? - SkatersCafeOct 11, 2012 — Default. I don't think you should pay more then $35 for bearings, reds are just fine. stumbles's  Everything You Need To Know About Bones BearingsAug 24, 2019 —...
  • Could a worn out wheel bearing make clunking noises?Feb 6, 2008 — I think there is a tiny spec of play in my right rear wheel/bearing. It doesnt make any noise or vibration when driving like a real bad bearing does  Symptoms of a Worn...
  • Trailer Wheel Bearing Maintenance - Felling TrailersJun 15, 2016 — Check for Heat – Tow the trailer for a short distance, 5-10 miles at highways speeds, then park the trailer. Place your hand on each of the wheel ...
  • Recommended Products

    All Products Contact Now